Print Friendly Brochure Print Friendly Brochure

Certificate I in Engineering

Qualification Attained*

* where all required units as per the Australian Qualifications Framework (AQF) are successfully completed

  • Certificate I in Engineering (MEM10105)

What will I get out of this program?

This qualification provides an opportunity for the student to acquire a range of basic skills in the engineering field. In addition to mandatory units other basic skills may include using hand tools, welding, soldering and the use of machines and applying protective coatings.

What job opportunities will I have?

Career opportunities in the manufacturing and engineering industry are:

  • Marine Craft Construction (Boat Building)
  • Diesel fitter
  • Fitter and turner
  • Boilermaker
  • Sheet metal worker

Do I need to have prior knowledge or work experience?

Sound Achievement in Year 10 English and Maths or equivalent is recommended.

What can I study after this?

Participants successfully completing the Certificate I in Engineering have the opportunity to enter a Certificate II Traineeship or Certificate III Apprenticeship in a specialist manufacturing or engineering trade or may enrol into a Certificate IV or Diploma level engineering program.

What study options do I have?

This brochure contains information on 2 study options:

  1. Certificate I in Engineering Pre Apprenticeship - Fabrication Stream - Bracken Ridge
  2. Certificate I in Engineering Pre-Apprenticeship - Fitting and Machining - Acacia Ridge

Study Option: Certificate I in Engineering Pre Apprenticeship - Fabrication Stream - Bracken Ridge

(back to study option list)

This pre-apprenticeship program is designed to skill prospective apprentices in engineering fabrication. The pathway aims to improve the skills base and employability of young people entering the engineering trades.

Delivery Package Number:
Prospective
Delivery Mode:
  • Face to face
Attendance Type:
Full Time
Training Centre:
Bracken Ridge
Entry Mode:
Expression Of Interest

How do I enrol?

This program is currently not open for direct enrolment and we are accepting Expression of Interest for our next intake. Please contact our Client Service Centre on 1800 654 447 or visit one of our Training Centres to register your interest in enrolling.

When can I start?

The next available intake is 14 July 2014.

How long will it take?

Full time for 15 weeks, with optional work experience.

How much time will I commit?

Class attendance, Monday, Tuesday 8:00am to 4:30pm and Wednesday 8.00am to 12.00pm with optional work experience on Thursday and Friday.

How much will it cost?

Government Subsidised Course Fee - $1456 for the whole program.

Government Subsidised Course Fee - Concession - $1157 for the whole program.

Full Fee - $4121 for the whole program.

Government Subsidised Course fee is for any eligible Queensland resident who does not already hold, and is not currently enrolled in, a post-school certificate III or higher level qualification (this means any equivalent certificate III or higher level qualification, irrespective of whether the qualification is through a university degree, apprenticeship or traineeship pathway).

Government Subsidised Course Fee – Concession is for any student who meets the above criteria and holds a valid concession at time of enrolment. Concessions are available to holders, dependents or partners of a current and valid Health Care Concession card (HCC) or Pensioner Concession Card (PCC) or an Aboriginal and Torres Strait Islander person. HCC and PPC cards will be validated with Centrelink at time of enrolment.

Full Fee is the fee charged for programs where the participant is not eligible under the Certificate 3 Guarantee requirements listed above.

Refunds will only be provided after enrolment if requested prior to start of study, unless exceptional circumstances exist. Please note that an Institute Refund Administration charge will be applied at the time of issuing a refund.

Fees are subject to change at any time without prior notice. Please check at the time of enrolment for confirmed fees.

Related Documents

Study Option: Certificate I in Engineering Pre-Apprenticeship - Fitting and Machining - Acacia Ridge

(back to study option list)

Completing this certificate at SkillsTech Australia (TAFE) could lead to a range of career opportunities in the manufacturing and engineering industry. You’ll learn how to use relevant engineering machines, tools and materials. You’ll also learn about mechanical cutting and several types of manual welding and manual production assembly.

Delivery Package Number:
Prospective
Delivery Mode:
  • Face to face
Attendance Type:
Full Time
Training Centre:
Acacia Ridge
Entry Mode:
Direct Entry

How do I enrol?

Telephone
Phone SkillsTech Australia Client Service Centre on 1800 654 447 between 8am to 5pm Monday to Thursday and Friday from 10am to 4:30pm.
NB: Payment can be made by credit card (Visa, Mastercard, AMEX) only.

Mail
Complete your Enrolment Selection Form, New Student Personal Details Form and post together with your payment to:

Client Service Centre
SkillsTech Australia
Locked Mail Bag 2020
ARCHERFIELD, QLD, 4108
NB: Payment can be made by credit card (Visa, Mastercard, AMEX), cheque, and/or money order.

In Person
Visit any TAFE Institute or one of SkillsTech Australia’s Client Service Centre. Please call 1800 654 447 to find your most convenient location.
NB: Payment can be made by credit card (Visa, Mastercard, AMEX), cheque, money order, EFTPOS or cash.

When can I start?

The next available intake is 28 April 2014.

How long will it take?

6 weeks.

How much time will I commit?

Monday to Friday from 9.00am to 3.45pm.

How much will it cost?

Government Subsidised Course Fee - $1456 for the whole program.

Government Subsidised Course Fee – Concession - $1157 for the whole program.

Full Fee - $4121 for the whole program.

Government Subsidised Course fee is for any eligible Queensland resident who does not already hold, and is not currently enrolled in, a post-school certificate III or higher level qualification (this means any equivalent certificate III or higher level qualification, irrespective of whether the qualification is through a university degree, apprenticeship or traineeship pathway).

Government Subsidised Course Fee – Concession is for any student who meets the above criteria and holds a valid concession at time of enrolment. Concessions are available to holders, dependents or partners of a current and valid Health Care Concession card (HCC) or Pensioner Concession Card (PCC) or an Aboriginal and Torres Strait Islander person. HCC and PPC cards will be validated with Centrelink at time of enrolment.

Full Fee is the fee charged for programs where the participant is not eligible under the Certificate 3 Guarantee requirements listed above.

Refunds will only be provided after enrolment if requested prior to start of study, unless exceptional circumstances exist. Please note that an Institute Refund Administration charge will be applied at the time of issuing a refund.

Fees are subject to change at any time without prior notice. Please check at the time of enrolment for confirmed fees.

Course Structure

Legend: C=Core Unit, E=Elective Unit

  1. Course Structure

    The requirement for the completion of this qualification consists of competency in 4 core and 9 elective units. Upon successful completion of all units you will receive a Certificate I in Engineering.

    SkillsTech Australia has packaged and recommends the following units to provide students with a range of skills to meet pre and co-requisite requirements of units.

    This list of units should be used as a guide only and may be subject to change in response to industry requirements.

    Unit Type Unit Code Details
    C MEM13014A Apply principles of occupational health and safety in the work environment  «more»This unit covers following occupational health and safety procedures in an engineering or similar work environment.
    C MEM14004A Plan to undertake a routine task  «more»This unit covers a person planning their own work where tasks involve one or more steps or functions and are carried out routinely on a regular basis. It includes the concepts of following routine instructions, specifications and requirements.
    C MEM15024A Apply quality procedures  «more»This unit covers applying established quality procedures to an employee's own work within a manufacturing, engineering or related environment.
    C MEM16007A Work with others in a manufacturing, engineering or related environment  «more»This unit covers operating in an interactive work environment. It covers contribution to a group effort in order to plan and carry out work. This includes identification of work roles, communication and cooperation with others.
    E MEM03001B Perform manual production assembly  «more»This unit covers assembling components and/or sub-assemblies in a production environment and testing the components and/or sub-assemblies to ensure compliance with specifications.
    E MEM05005B Carry out mechanical cutting * «more»This unit covers setting up and operating a range of mechanical cutting and holing equipment.
    E MEM05007C Perform manual heating and thermal cutting  «more»This unit covers performing manual heating, thermal cutting and gouging including the assembly and disassembly and operation of the equipment on a range of materials (ferrous, non-ferrous and non-metallic) using a variety of methods.
    E MEM05013C Perform manual production welding  «more»This unit covers performing tacking or production welding, including spot welding using a range of methods and metallic and non-metallic materials in a production environment.
    E MEM07032B Use workshop machines for basic operations * «more»This unit covers basic machining in a maintenance or jobbing environment.
    E MEM12023A Perform engineering measurements  «more»This unit covers performing measurement skills requiring straight forward use of mechanical measuring devices and associated calculations.
    E MEM12024A Perform computations  «more»This unit covers estimating approximate answers to arithmetical problems, carrying out basic calculations involving percentages and proportions, and determining simple ratios and averages. The unit includes producing and interpreting simple charts and graphs.
    E MEM18001C Use hand tools  «more»This unit covers using a range of hand tools for a variety of general engineering applications.
    E MEM18002B Use power tools/hand held operations  «more»This unit covers using a range of hand held power tools and fixed power tools for hand held operations for a variety of general engineering applications.

*Please note prerequisites/corequisites exist for this unit. For further details, please contact the Client Service Centre on 1800 654 447.

For current full unit descriptions, please search for this course at the National Training Information Website www.training.gov.au.

Related Documents

General Information

Recognition of Prior Learning (RPL)

Do you have industry experience you would like to recognise?
Prior to enrolment we are able to assess your skills via Credit Transfers or Recognition of Prior Learning (RPL).
If you have completed an accredited program through another training provider you may be eligible to receive a Credit Transfer.
If you have relevant industry experience you may be eligible to receive Recognition of Prior Learning (RPL).
For further information please contact our Recognition Services Team: SkillsTech.Recognition@tafe.qld.edu.au or 1800 654 447.

Centrelink/Austudy

Financial assistance may be available in the form of contacting Centrelink:
Youth Allowance and Austudy 13 24 90
Newstart Allowance 13 28 50
Abstudy 132317

Time to Pay

Time to Pay is available for eligible applicants for further information please contact our Client Service Centre on 1800 654 447.

How do I find out more?

For more information about this or other programs that SkillsTech Australia offers please visit our website at http://www.skillstech.tafe.qld.gov.au or contact us by the following options:

Phone : 1800 654 447
Office Hours, Monday to Thursday 8:00am to 5:00pm and Friday 10:00am to 4:30pm.

Email : SkillsTech.Enquiries@tafe.qld.edu.au

In Person :
Office Hours Monday to Thursday 8:00am to 5:00pm and Friday 10:00am to 4:30pm.
Acacia Ridge: 247 Bradman Street, ACACIA RIDGE
Eagle Farm: 776 Kingsford Smith Drive, EAGLE FARM

Mail :
SkillsTech Australia
Locked Mail Bag 2020
ARCHERFIELD QLD 4108

Fax : 07 3633 5033

Information correct as at 25 February 2014.

MEM10105-Q244-20121121

Home | Glossary | Site map | Contact us | Search

Translate this page to:

SkillsTech Australia is not responsible for the accuracy of content translated by Google